Victony AC1200 Extender setup

Enhancing and extending your wireless network coverage with the Victony AC1200 Extender Setup can provide a stable and high-speed connection across your home or office. To ensure a successful setup, follow these steps:

Manual Configuration of Victony AC1200 Extender:

To configure your Victony AC1200 extender, follow these steps to access and manually adjust its web-based setup page:

• Plug your Victony AC1200 extender into an electrical socket.

• Access the WiFi settings on your computer or mobile device.

• Connect to the “Victony_EXT” network.

• Launch a web browser like Firefox, Safari, or Chrome.

• In the address bar, enter either “ap.setup” or “192.168.10.1” and press Enter.

• Follow the on-screen instructions to set up the extender, including entering your existing WiFi network’s SSID and password.

• Place the extender between your router and the area with a weak WiFi signal, ensuring it’s within range of your existing network.

Congratulations, you have now completed the Victony AC1200 Extender Setup manually. If you encounter any issues, don’t hesitate to reach out to our technical support team via our toll-free number.

Victony AC1200 Extender Setup Using WPS:

For a quicker setup using WPS, follow these steps:

• Wait for the power LED to turn solid green before plugging in the Victony AC1200 extender.

• Push the WPS button on the extender.

• Press the WPS button on your router within a few minutes.

• Wait for the extender’s WPS LED to turn solid green, indicating a successful connection.

Your Victony AC1200 extender has been successfully configured via WPS.

Resetting Your Victony AC1200 Extender:

If you need to reset your Victony AC1200 Extender, follow these steps:

• Locate the reset button on your Victony AC1200 extender.

• Hold down the reset button for approximately 10 seconds using a paperclip or a similar tool.

• Release the button once the LED lights on the extender start blinking.

• Wait for about a minute for the extender to complete its restart process.

Please be aware that a factory reset erases customized settings, so ensure you have your network names and passwords before resetting.

Updating Firmware on Victony AC1200 Extender:

To update the firmware on your Victony AC1200 Extender, do the following:

• Go to the Victony website and navigate to the “Support” or “Downloads” section.

• Download the most recent firmware update for your AC1200 Extender.

• Access the extender’s setup website and select the “Manual Setup Method.”

• Choose “Firmware Update” and upload the firmware file.

• Wait for the update to complete before rebooting the extender.

Always download firmware from the official Victony website to avoid compatibility issues or safety risks. Contact Victony’s customer service if you need clarification on manually upgrading the firmware.

Troubleshooting Tips:

Victony AC1200 Extender setup can be challenging, but with the right troubleshooting guidance, the process can be simplified. If you encounter difficulties during the setup, follow these steps for assistance:

• Position the extender correctly.

• Check for signal obstructions.

• Ensure the extender is powered up and properly connected.

• Use the correct WiFi password.

• Consider relocating the extender for better coverage.

• If problems persist, perform a factory reset and reconfigure.

For advanced assistance, contact Victony customer service. Consult your Victony AC1200 extender’s user manual for detailed instructions and troubleshooting guidance. If issues persist, contact the technical support team at the provided toll-free number (+1-323-471-3045).

About Author